Weighing as little as 26 lbs (12 kg), you can take the new XC2 Cordless Battery Pump almost anywhere. Whether you're 'off the grid' or inside a facility, this game changing pump combines the power of a traditional electric 1/2" horsepower (0.37 kW) pump with the freedom to lift, pull, split, torque, or cut. Even in the most demanding applications. Complete with an optional shoulder strap and environmentally protected IP67 control pendant, the XC2 allows you to get to the job site easily - and get your work done fast.

Before the XC-Series, cordless battery pumps simply didn't have the speed, capacity, or accuracy to tackle larger jobs, forcing people to turn to exhausting manual pumps to get the job done. The XC2 features the Enerpac High-capacity 54 Volt battery that keeps you working for longer and delivers flow rates comparable to a 1/2 horsepower electric pump - running 2.5 x longer and 30% faster than the XC1.

The XC2's control gives you the accuracy to ensure your project is completed to your exacting standards, with an even more precise variable speed trigger available on manual valve models.

In addition to a longer runtime, faster speed, and more precise control, the new 1-gallon (4-litre) capacity model creates a new world of possibilities, setting you free to take on larger and higher cycle jobs. The clever bladder design means the pump can be used in almost any position, even upside down.

On a single charge the new pump delivers exceptional performance with Enerpac tools:

• 4.5 x lifts with a 100 Ton Cylinder¹
• 10.5 x Lifts with a 50 Ton Cylinder²
• 43 x Lifts with a 30 Ton Cylinder³
• 57 x 2"/50mm Heavy Hex Nuts split⁴
• 317 x Holes punched in 1/4"/6.5mm thick mild steel⁵
• 84 x hard joint 60mm AF fasteners torqued⁶
• 32 x fasteners torqued on a Flange 1500#. 2-inch AF⁷

1. 80 Ton load lifted using RAR1006.
2. 40 Ton load lifted using RAR506.
3. 22 Ton load lifted using XC2 and RCS302.
4. 57 Heavy hex nuts split: A194 Grade 2H, 2", 50mm using NC5060 Nut Splitter
5. 317 x 13/16-inch (20.6mm) holes punched into 1/4"/6.5mm thickness mild steel using SP35 Punch.
6. 84 hard joint fasteners using XC2 Torque Pump with W2000X torque wrench. Single passes using 1356Nm. Nuts 60mm AF on a 38mm stud.
7. 32 fasteners torqued using W2000X torque wrench. Flange 1500# 2-inch AF on a 1 1/4 inch stud using 1320Nm. 3+Ringer passes. Actual number of fasteners per charge will vary depending on condition of tools and materials.